|
850nm High Power
Polarization Insensitive Isolator |
|
|
|
|
Download PDF |
|
| Features |
|
Applications |
|
|
|
| Low Insertion Loss |
|
Fiber Laser |
|
|
|
| High Isolation |
|
Instrumentation |
|
|
|
| High Power Handling |
|
Fiber Amplifier |
|
|
|
| High Return Loss |
|
Lab Research |
|
|
|
|
|
|
|
|
|
| Specifications |
| Parameters |
Unit |
Values |
| Center
Wavelength (λc) |
nm |
850 |
| Operating
Wavelength Range |
nm |
±10 |
| Max.
PDL at 23℃ |
dB |
0.1 |
| Typ.
Peak Isolation |
dB |
32-40 |
| Min.
Isolation at 23℃ |
dB |
25 |
| Typ.
Insertion Loss at 23℃ |
dB |
0.6 |
| Max.
Insertion Loss at 23℃ |
dB |
1.0 |
| Min.
Return Loss (input/output) |
dB |
50/50 |
| Max.
Optical Power (CW) |
W |
0.3 , 0.5 or specify |
| Max.
Tensile Load |
N |
5 |
| Fiber
Type |
|
HI 780 Fiber |
| Operating
Temperature |
℃ |
'-5 to
+50 |
| Storage
Temperature |
℃ |
-20 to+75 |
|
|
|
|
|
|
| *Above
specifications are for device without connector. |
|
| *For devices
with connectors, IL will be 0.3dB higher, RL will be 5dB lower. |
|
|
| *The actual
package dimensions may be slightly different from that shown in below
drawing, for accurate dimensions |
| please contact Aistana. |
|
|
|
|
|
|
|
|
|
|
|
| Package Dimensions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Ordering Information |
|
|
|
|
|
| AHPII-①①-②-③-④④-⑤⑤-⑥⑥ |
|
|
|
|
|
|
|
|
|
|
| ①①: Wavelength |
④④:
Connector Type on Port 1 & 2 |
⑤⑤: Fiber
Jacket on Port 1 & 2 |
| 85 - 850nm |
1 -
FC/UPC |
|
B -
250um Bare Fiber |
| SS - Specify |
2 -
FC/APC |
|
L -
900um Loose Tube |
|
3 -
SC/UPC |
|
C - 3mm
Loose Cable |
| ②: Package Type |
4 -
SC/APC |
|
S - Specify |
|
| C40 - Type C40 |
N -
None |
|
|
|
|
S -
Specify |
|
⑥⑥: Fiber
Length |
| ③:Handling Power |
|
|
1 - 1.0m |
|
| 0.3 - 300mW |
|
|
S - Specify |
|
| 0.5 - 500mW |
|
|
|
|
|
|
|
|
|
|
|